Payment & Shipping Terms:
|Materials:||Al6063 T5||Product Name:||Aluminum Veneer|
|Color:||PVC Wood Vneer||Certification:||SGS, RoHS, UL And FDA Standard|
|Application:||Kitchen, Cellar, Balcony, Armoire, Panel, Floor||Shape:||Depend On Your Design|
|Surface Treatment:||Venner Aluminum||Machining:||Cutting, Drilling, Threading, Bending, Etc|
t5 6063 aluminum square tube,
6063 aluminum square tube stock,
t5 aluminum square tube stock
For highly durable in bonding of:
General edge banding in the furniture industry
PVC and wood based profiles with:
Yellow chromated aluminium profiles
For interior finishing of motor vehicles:
PUR- hotmelts react with ambient air humidity. KLEIBERIT PUR-HM 702 is available in tightly closed metal containers suitable for platen melters. The package should only be open immediately before use.
The melting equipment must constructed in such a way that the adhesive is protected from ambient air humidity. It is important that the temperature can be controlled accurately.
Yellow chromated aluminium profiles must be preheated to approx. 40 °C immediately before bonding. The chrome coating must not be older then 4 weeks.
The application temperature for profile wrapping is from 140 °C to 160 °C. For edge banding the application temperature is in the range from 120 °C.
(veneer and resin paper can have higher application temperatures)
The required coat weight depends on the material: E.g. Profile wrapping:
-PVC-Foil 40 - 60 g/m2
(Incl. CPL-Material and thick papers) 50 - 70 g/m2
E.g. Edge banding onto:
Properties of the adhesive Basis: Polyurethane
Specific gravity: approx. 1.04 g/cm3
Viscosity (on the day of production) -Brookfield HBTD 10 rpm (mPa.s):
|Product Nr.||120 °C||140 °C||160 °C|
|702.5||60.000士||35.000 士||20.000 士|
|702.7||100.000 士||60.000 士||35.000 士|
|702.9||200.000 士||100.000 士||60.000 士|
The speed, depending on the materials and the profile geometries used, is between 10-60 m/min and can be even higher. The final bond strength is reached after approx. 7 days.
Chemical cross linking of PUR hotmelts requires moisture. Therefore sufficient air humidity has to be present during processing.
Contact Person: Yuki