Extruded 6063 Aluminum Motor Enclosure Extrusion Casing Water Cooled

Extruded Aluminum Motor Enclosure, Aluminum Extrusion Motor housing, Aluminum Motor Casing

Product Description:

Aluminium water-cooled motor housing is extruded. And the cooling water circulation in the inner lining of the shell is carried out. Taking away the heat generated by the motor run time. This process makes the motor housing almost no heat dissipation outside. The water cycle replaces the cooling fan.
The research and development of aluminium extruded motor housing have successfully replaced the motor housing in aluminium die-cast forming. These problems that motor housing in aluminium die casting faced that poor density of materials, easy to cause porosity, blowholes and other casting defects will be solved and successfully avoid the defects of poor surface casting roughness and lower corrosion resistance.

Aluminum Extruded Motor Housing ( or Extruded Aluminium Motor Enclosure) has a better performance than other materials: Lightweight; Low noise; Energy saving and high efficiency, using aluminium alloy 6063 as the material is extruded by hot extrusion. Inner hole concentricity ≤0.07 mm.

Aluminium extruded motor housing is mainly applied to the micromotor, environmental air conditioner motor, Water cooled air conditioning motor, air compressor motor, negative pressure blowers, electric motor, electro-tricycle motor, cooling tower machine, electric power tool motor, and gear motor etc.

contact: Summer +86 15162362609